ANALYSIS OF ROAD GEOMETRIC DESIGN ON THE 2 KM MAJALENGKA – CIKIJING ROAD SECTION (KASTURI STREET CASE STUDY)

Authors

  • Sevan Alif Maulana Universitas Majalengka
  • Jody Martin Ginting Universitas Internasional Batam
  • Adinda Fajarika Universitas Mercu Buana

DOI:

https://doi.org/10.37253/leader.v2i2.9548

Keywords:

Highway, Road Geometric Design

Abstract

Road geometric design is part of road engineering, with a focus on the engineering design of the physical form of the road to realize the basic function of the road. Road geometry design products include horizontal alignment, vertical alignment, and road cross sections. The geometric design of the road takes into account traffic safety and comfort in accordance with the function of the road. Estimated traffic flows include motorized vehicles, bicycles, and pedestrians. Road construction in developing countries aims to connect isolated areas and encourage economic growth through better population mobility. Therefore, the government needs to be encouraged. This key element focuses on achieving a balance between regional development and national security for national development. Without sufficient access, it will be difficult for people to conduct activities with different parties. When planning grade curves to improve road safety, attention is paid to the type of curve, the condition of the ground contour to avoid slopes and rivers, and the average speed of road users, all of which affect the minimum circle radius. The minimum circle radius value is a factor that affects the sharpness of the road's horizontal curve at a later stage, if the minimum radius is used then the curve will be very sharp. Therefore, the required turn value needs to be considered and adjusted to the standard so that the horizontal curve of the road is not too steep for the user.

Downloads

Download data is not yet available.

References

Andito, I. R. (2022). The Design of Horizontal Alignment Using Indonesia Highway Design Standard: A Case of Jalan Babat-Tapen, East Java.Indonesian Journal of Multidisciplinary Science, 200.

Gaikawad, P. &. (2020). A Review-Geometric Design of Highway with the Help of Autocad Civil 3D. International Journal for Research in Applied Science and Engineering Technology, 8 (5).

Megarestya, A. R. (2022). The Horizontal Curved Geometric Design with Autocad® Civil 3D on Jalan Muara Wahau, East Kalimantan. Indonesian Journal of Multidisciplinary Science, 237-250.

Rosaria, L. R. (2022). The Geometric Design of Horizontal Alignment: A Case Of Post-Harvest Infrastructure Corn Drying Center, Tuban, East Java. Indonesian Journal of Multidisciplinary Science, 224-236.

sanjaya, Y. (2023, April 2).LET'S WATCH! The budget for road repairs in Majalengka - Cikijing - Talaga from Ridwan Kamil Reaches IDR 33.2 Billion. Retrieved from radarmajalengka.com: https://radarmajalengka.disway.id/read/652406/yuk-awasi-anggaran-perbaikan-jalan-di majalengka-cikijing-talagadari-ridwan-kamil-menreach-rp-332-miliar

Suprayoga, G. B. (2020). Coping with strategic ambiguity in planning. Impact Assessment and Project Appraisa.

Yulianto, E. (2023, March 30).The Severely Damaged Cikijing-Majalengka Road Section is Being Repaired, Just Completed after Eid. Retrieved from Jabar Tribun News:

https://jabar.tribunnews.com/2023/03/30/ruas-jalan-cikijing-majalengka-yang-rusak-parah-diperbaiki-baru-selesai-after-lebaran

Downloads

Published

2024-04-27

Issue

Section

Articles