ROAD GEOMETRIC REDESIGN USED AUTOCAD®2D: A CASE JALAN SILIWANGI MAJALENGKA, INDONESIA
DOI:
https://doi.org/10.37253/leader.v2i2.9538Keywords:
Geometric Redesign AutoCAD®2D Vertical Alignment Horizontal Alignment SuperelevationAbstract
Jalan Siliwangi is a road located in Panyingkiran that is a link to the city. This design planning starts in the Kadipaten sub-district and extends to the Panyingkiran sub-district is called jl. Siliwangi is 5.3 kilometers long. In addition, the design standard criteria in this study refer to the road geometric guidelines issued by the Ministry of Public Works and Public Housing Circular Letter of 2020 of the Director General of Highways. The results of the geometric design visualized in the form of drawings using AutoCAD 2D. The design speed (Vd) set at 60 km/h with a horizontal arc radius of 358 m, a maximum slope of 4%, and an elevation (e max) of 8%. Based on these design criteria, a spiral curve with a circular arc length (Lc) of 74,996 m obtained. Then, the calculation results of the long vertical alignment of the PPV (L) of one type of concave curve are calculated.
Downloads
References
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® 2D: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 729-738.
Afolayan, A., Abiola Samson, O., Easa, S., Modupe Alayaki, F., & Folorunso, O. (2022). Reliability-based analysis of highway geometric Elements: A systematic review. Cogent Engineering, 9(1), 2004672.
Almatar, K. M. (2023). Traffic congestion patterns in the urban road network:(Dammam metropolitan area). Ain Shams Engineering Journal, 14(3), 101886.
Chakole, H., & Wadhai, P. J. (2022). A Review on The comparison of geometric design using Civil 3D software and manual method. International Journal for Modern Trends in Science and Technology, 117.
De Yong, S., Kusumarini, Y., & Tedjokoesoemo, P. E. (2020). Interior design students’ perception for AutoCAD, SketchUp and Rhinoceros software usability. In IOP Conference Series: Earth and Environmental Science (Vol. 490, No. 1), 012015.
Goyani, J., Chaudhari, P., Arkatkar, S., Joshi, G., & Easa, S. M. (2022). Operating speed prediction models by vehicle type on two-lane rural highways in Indian hilly terrains. Journal of transportation engineering, Part A: Systems, 148(3), 04022001.
Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD® 2D for Geometric Design of Terbanggi Besar–Pematang Panggang Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 757-765.
Jimoh, J. A. (2019). Comparative effects of 2D and 3D methods of graphics in autocad on interest of national diploma students in engineering graphics in south-west Nigeria. International Journal of Educational Research, 6(1), 91-101.
Kamble, V. P., Sunsule, A. B., Agre, R. U., Dongare, T. G., Satkar, P. A., Takalkar, R. S., & Dhage, P. C. (2022). Study on Geometry Design of the Highway. International Journal of Research Publication and Reviews, Vol 3, no 12, 2792-2794,.
Nugroho, R. B., Rifai, A. I., & Akhir, A. F. (2022). The Geometric Design of Horizontal Alignment: A Case of Bojonggede-Kemang Area Route, West Java Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 331-343.
Nurjannah, S. N., Rifai, A. I., & Akhir, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD® 2D. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 692-702.
Oktobrianto, A., Rifai, A. I., & Akhir, A. F. (2022). The Traffic Characteristic Analysis of Jalan Ciater Raya South Tangerang, Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 437-450.
Onur, A. Z., & Nouban, F. (2019). Software in the architectural presentation and design of buildings: State-of-the-ar. International Journal of Innovative Technology and Exploring Engineering (IJITEE)[Online], , 8(10).
Purnama, E., Rifai, A. I., & Nasrun, N. (2022). Analysis of Road Performance Used Indonesian Highway Capacity Manual 1997: A Case Jalan KH Abdul Halim Majalengka-Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 888-895.
Rahayu, Y. S., Rifai, A. I., & Taufik, M. (2022). Analysis of Road Geometrics with ASSHTO Method (Solo–Yogyakarta–NYIA Kulon Progo Toll Road Section 1 Package 1.1 Solo–Klaten (STA 0+ 000–22+ 300). Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 944-954.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® Civil 3D: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 879-887.
Salsabila, S., Rifai, A. I., & Taufik, M. (2022). The Geometric Design of Horizontal Curves Using The Autocad Civil 3D® Method: A Case Study of Trans Flores Roads. Indonesian Journal of Multidisciplinary Science, 1(1), 251-264.
Segui, P., Safhi, A. E., Amrani, M., & Benzaazoua, M. (2023). Mining Wastes as Road Construction Material: A Review. Minerals, 13(1), 90.
Ulchurriyyah, N., Rifai, A. I., & Taufik, M. (2022). The Geometric Redesign of Horizontal Curved Using AutoCAD Civil 3D®: A Case Jalan Garuda–Jalan Moh. Hatta, Tasikmalaya West Java. Indonesian Journal of Multidisciplinary Science, 1(1), 288-303.
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD® Civil 3D: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 843-850.
.png){kind=small}
