Implementation of Autocad® Civil 3D for Cut and Fill Calculation of Margoyoso Road Section BTS, Jepara – Kudus Regency
DOI:
https://doi.org/10.37253/leader.v3i1.10596Keywords:
Margoyoso Road Autocad® Civil 3D Cut and fillAbstract
The small and medium-sized industry in Jepara Regency has shown significant progress, with one of the most notable small industries in Margoyoso Village being the monel craft industry. Good infrastructure support, such as Margoyoso Road, undoubtedly contributes to the local economy. One indicator of good infrastructure development is efficiency in terms of time and cost. This paper discusses the implementation of AutoCAD® Civil 3D in cut-and-fill calculations. The calculation process using AutoCAD® Civil 3D with the cross-section method resulted in a cut volume of 57,581.60 m^3, a fill volume of 31,952.90 m^3, and a net volume of 25,628.70 m^3. These results prove that the implementation of AutoCAD® Civil 3D provides faster, more accurate, and more precise data.
References
[1] A. L. C. Ferrer, A. M. T. Thomé and A. J. & Scavarda, "Sustainable urban infrastructure: A review," Resources, Conservation and Recycling, 128, pp. 360-372, 2018.
[2] S. Kamilla and D. M. Hutajulu, "Pengaruh Infrastruktur terhadap Pertumbuhan Ekonomi di Provinsi Jawa Tengah," JUSIE (Jurnal Sosial dan Ilmu Ekonomi), 5(02), pp. 169-179, 2020.
[3] R. Rizki, A. I. Rifai and E. Z. Djamal, "Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350)," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 859-864, 2022.
[4] H. J. Hamzah and S. Wulandari, "Pengaruh Geotekstil Terhadap Stabilitas Timbunan Jalan," Borneo Engineering: Jurnal Teknik Sipil, 1(1), pp. 33-44, 2022.
[5] M. L. Hariani, M. A. Sugiyanto and R. Septiandri, "Aplikasi Software AutoCAD Civil 3D dan MDP 2017 dalam Perencanaan Jalan Raya (Studi Kasus: Ruas Jalan Linggarjati–Cirendang Kabupaten Kuningan)," Siklus: Jurnal Teknik Sipil, 8(2), pp. 183-196, 2022.
[6] F. Eliza, H. Hastuti, D. E. Myori and D. T. P. Yanto, "Peningkatan Kompetensi Guru Sekolah Menengah Kejuruan Melalui Pelatihan Software Engineering," JTEV (Jurnal Teknik Elektro dan Vokasional), 5(1), pp. 37-45, 2019.
[7] M. Rizqi, A. I. Rifai and S. K. Bhakti, "Design of Road Geometric with AutoCAD® Civil 3D: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 879-887, 2022.
[8] H. Chakole and P. J. Wadhai, " The comparison of geometric design using Civil 3D software and manual method," International Journal for Modern Trends in Science and Technology, pp. 123-124, 2022.
[9] S. A. E. Pandey and Y. Bajpai, "Planning, Designing And Proposing A Flyover Road Using Autocad Civil 3D Software," Planning, pp. 164-168, 2019.
[10] S. Kanwal, M. I. Rasheed, A. H. Pitafi, A. Pitafi and M. Ren, "Road and transport infrastructure development and community support for tourism: The role of perceived benefits, and community satisfaction," Tourism Management, p. 77, 2020.
[11] A. H. Agniya, A. I. Rifai and M. Taufik, "The Geometric Design of New Jakarta-Cikampek Highway Access Using Autocad® Civil 3D: A Case of West Karawang Industrial Area," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 189-198, 2022.
[12] A. Rizaldi, V. Dixit, A. Pande and R. A. Junirman, " Predicting casualty-accident count by highway design standards complianceI," International journal of transportation science and technology, pp. 74-183, 2017.
[13] M. F. Ricky and T. Riyadhsyah, "Perencanaan Alinyemen Vertikal Dan Alinyemen Horizontal Jalan Dengan Menggunakan Drone Sebagai Media Memperoleh Peta Kontur," Jurnal Sipil Sains Terapan, 3(02), 2020.
[14] S. N. Nurjannah, A. I. Rifai and A. F. Akhir, "Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD® 2D," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 692-702, 2022.
[15] I. Suhadi and N. M. Rangkuti, "Analisa Tingkat Keselamatan Lalu Lintas Pada Persimpangan Dengan Metode Traffic Conflict Technique (TCT)," Journal Of Civil Engineering Building And Transportation, 3(2), pp. 62-70, 2019.
[16] M. Ibrohim, "Sistem Informasi Geografis Tingkat Kerusakan Ruas Jalan Berbasis Web," JSiI (Jurnal Sistem Informasi), 6(1), pp. 20-31, 2019.
[17] D. S. Adiputra, A. I. Rifai and S. K. Bhakti, "Design of Road Geometric with AutoCAD® 2D: A Case Wirosari-Ungaran Semarang, Indonesian," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 729-738, 2022.
[18] Z. Dong, W. Zhaoming, L. Zhiqiang and Y. Minmin, "Research on Application of Highway Green Construction Technology," In IOP Conference Series: Earth and Environmental Science (Vol. 310, No. 2, p. 022002), p. IOP Publishing, 2019.
[19] C. Li, X. Gao, B. J. He, J. Wu and K. Wu, "Coupling coordination relationships between urban-industrial land use efficiency and accessibility of highway networks: Evidence from Beijing-Tianjin-Hebei urban agglomeration, China," Sustainability, 11(5), p. 1446, 2019.
[20] A. I. Rifai, Y. A. Surgiarti, M. Isradi and A. Mufhidin, "Analysis of Road Performance and the impact of Development in Pasar Minggu, Jakarta (Case Study of Jalan Lenteng Agung-Tanjung Barat)," International Journal of Civil Engineering, 6(1), pp. 68-74, 2021.
.png){kind=small}
