ROAD GEOMETRIC PLANNING USING AUTOCAD® CIVIL 3D: A CASE STUDY OF LEUWIKIDANG HIGHWAY, MAJALENGKA
DOI:
https://doi.org/10.37253/leader.v2i2.9564Keywords:
Highway, Road Geometric, AutoCAD 3DAbstract
Jalan Raya Leuwikidang is a land transportation infrastructure that plays an important role in the field of transportation, especially in the distribution of goods and services. The road has horizontal and vertical alignment and is slightly less safe for road users. This study aims to review the horizontal and vertical alignment analysis and compare the results of the review with the planning results based on road convenience. This research method uses quantitative methods. The data used in this study are the results of a review of horizontal alignment, vertical alignment, superelevation, jph and jpm.
Downloads
References
Kamble, V. P., Sunsule, A. B., Agre, R. U., Dongare, T. G., Satkar, P. A., Takalkar, R. S., & Dhage, P. C. (2022). Study on Geometry Design of the Highway. International Journal of Research Publication and Reviews, Vol 3, no 12, 2792-2794.
Veer, S. P., Gupte, S., & Juremalani, J. (2018). A Review of Literature on Geometric Design of Highway. International Research Journal of Engineering and Technology (IRJET) Volume, 5(1), 138-141.
Agniya, A. H., Rifai, A. I., & Taufik, M. (2022). The Geometric Design of New Jakarta-Cikampek Highway Access Using Autocad® Civil 3D: A Case of West Karawang Industrial Area. Indonesian Journal of Multidisciplinary Science, 1(1), 189-198.
Faisal, R., Lulusi, L., & Sanra, S. (2021). Geometric Design of Inter-City Roads Using AutoCAD Civil 3D Student Version (Case Study of Jalan Mandeh, West Sumatra Province). Journal of Civil Engineering and Planning Archives, 4(3), 133-142.
Fauzan, E. R., Thoriq, Y. A., Arif, M. Z., & Wicaksono, A. (2016). Road geometric study at the Porong Sidoarjo new arterial roundabout. Civil Engineering Student Journal, 2, 45-57.
Kaharu, F., Lalamentik, L. G., & Manoppo, M. R. (2020). Road geometric evaluation on the Manado-Gorontalo Trans Sulawesi road section in the village of Botumoputi with a length of 3 km. Journal of Civil Statistics, 8(3), 353-360.
Lubis, M., Rangkuti, N. M., & Ardan, M. (2019). Evaluate the road geometry at the Laowomaru bend. UISU Technical National Seminar (SEMNASTEK) Vol. 2, No. 1, pp, 37-43.
Lubis, M., Tarigan, G., Suharamadhan, A., & Batubara, H. (2022). Performance Analysis of Col. Unsignalized Intersection. Yos Sudarso–Sumatra Island Road in Mabar Village, Medan Deli District, Medan City. Main Technical Bulletin, 17(2), 203-211.
Mandal, M., Pawade, P., Sandel, P., & Infrastructure, R. S. (2019). Geometric design of highway using Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3), 214-217.
Masitoh, S., Rozy, N., & Anwar, S. (2020). Road Geometric Analysis of Majalengka North Ring Road Section, Majalengka Regency. Journal of Construction and Infrastructure, 8(1), 466-471.
Masuara, E. P., Kadir, Y., & Patuti, I. M. (2022). Performance Analysis of Road Sections for the Kalimadu Culinary Center, Gorontalo City Tadulako Reconstruction. Civil Engineering Journal on Research and Development, 45-50.
Michael, W. (2022). Sentosa Road Performance in Samarinda. Student Curve, 12(3), 1-17.
Rambitan, D. W., Lalamentik, L. G., & Sendow, T. K. (2022). Road Geometric Analysis on Tondano-Suluan Road STA 0+ 000-STA 3+ 000. Tekno, 20(81), 375-384.
Rizki, R., Rifai, A. I., & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Indonesian Multidisciplinary Scientific Journal, 2(5), 859-864.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® Civil 3D: A Case of Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 879-887.
Samsudin, I. (2019). Analysis of Factors Causing Accidents on Ir. H. Alala City of Kendari in terms of Road Infrastructure and Geometric. Journal of Land Transportation Research, 21(1), 59-66.
Subkhan, M. F. (2019). Evaluation and Re-planning of Road Geometric Design Based on Bina Marga Standards on Dadaprejo Road Section, Batu City. Journal of Civil Engineering, 12(2), 79-84.
Suwandi, A., & Harun, M. (2022). Geometry Design of Trunojoyo Airport Ring Road, Sumenep Regency. Journal of Planning and Civil Engineering, 5(1), 12-17.
Budisusanto, Y., & Rozi, A. F. (2019). Evaluation of Road Geometric Planning Using Vechiles Tracking Analysis (Case Study: Surabaya West Outer Ring Road). Geoid, 14(2), 123-129.
.png){kind=small}
