REDESIGN OF ROAD GEOMETRIC WITH AUTOCAD CIVIL 3D® CASE STUDY: JL. KADIPATEN-KASOKANDEL (STA 0+000-STA 4+800)
DOI:
https://doi.org/10.37253/leader.v2i2.9537Keywords:
Road geometric design Sight Distance Autocad Civil 3D®Abstract
Road geometric planning is part of road development planning which aims to determine the actual dimensions of the road and its function to suit traffic needs. In the geometric planning of the Kadipaten-Kasokandel road at STA 0+000-STA 4+800, geometric patterns and shapes must be planned so that the related streets can produce optimal service to traffic according to their function. Road geometric planning on the Kadipaten-Kasokandel road section from Sta 0+000 to Sta 4+800 using AutoCAD®Civil 3D using the design speed plan (VD) criteria of 80 km/hour, the terrain classification on this road section is flat terrain. In the horizontal alignment, there are four bends with three curves using the Spiral-Circle-Spiral type, while the first use the Full Circle bend type. In the vertical alignment, there are seven segments of the inclined plane.
Downloads
References
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® 2D: A Case Wirosari-Ungaran Semarang, Indonesian. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 729-738.
Agniya, A. H., Rifai, A. I., & Taufik, M. (2022). The Geometric Design of New Jakarta-Cikampek Highway Access Using Autocad® Civil 3D: A Case of West Karawang Industrial Area. Indonesian Journal of Multidisciplinary Science, 1(1), 189-198.
Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD® Civil 3D (STA 3+ 000-STA. 4+ 800). Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 851-858.
Farid, M. R., Rifai, A. I., & Taufik, M. (2022). The Alignment Horizontal Design of Alternative Road: A Case of Jalan Subang–Cikamurang, West Java. Indonesian Journal of Multidisciplinary Science, 1(1), 344-356.
Gargoum, S. A., & Karsten, L. (2021). Virtual assessment of sight distance limitations using LiDAR technology: Automated obstruction detection and classification. Automation in Construction, 125., 103579.
Godumula, D. T., & Ravi Shankar, K. V. (2023). Safety evaluation of horizontal curves on two lane rural highways using machine learning algorithms: a priority-based study for sight distance improvements. Traffic injury prevention, 1-7.
Gunawan, R. Y., Rifai, A. I., & Irianto, M. A. (2022). AutoCAD® 2D for Geometric Design of Terbanggi Besar–Pematang Panggang Highway (Sta. 28+ 650–Sta. 53+ 650). Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 757-765.
Joice, E. O., Rifai, A. I., & Taufik, M. (2022). The Link Road Design of Jalan Plupuh Tanon And Jalan Gabugan Section 1, Sragen Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 211-223.
Llopis-Castelló, D., Pérez-Zuriaga, A. M., Camacho-Torregrosa, F. J., & García, A. (2018). Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions. Transportation Research Part D: Transport and Environment, 59, 46-57.
Maulana, S. H., Rifai, A. I., & Isradi, M. (2022). The Horizontal Curved Geometric Redesign on Jalan Kayu Api Kuala Penaso, Riau Using the Autocad Civil 3d® Method. Indonesian Journal of Multidisciplinary Science, 1(1), 318-330.
Nugroho, R. B., Rifai, A. I., & Akhir, A. F. (2022). The Geometric Design of Horizontal Alignment: A Case of Bojonggede-Kemang Area Route, West Java Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 331-343.
Nurjannah, S. N., Rifai, A. I., & Akhir, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD® 2D. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 692-702.
Nurjannah, S. N., Rifai, A. I., & Akhir, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD® 2D. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 692-702.
Oktobrianto, A., Rifai, A. I., & Akhir, A. F. (2022). The Traffic Characteristic Analysis of Jalan Ciater Raya South Tangerang, Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 437-450.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. In Applied Mechanics and Materials (Vol. 845), 369-378.
Rizki, R., Rifai, A. I., & & Djamal, E. Z. (2022). Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350). Citizen: Jurnal Ilmiah Multidisiplin Indonesia 2(5), 859-864.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® Civil 3D: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. . Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 879-887.
Said, U. A. (2022). Analisis Pengaruh Faktor Geometrik Jalan terhadap Kecelakaan Lalu Lintas (Studi Kasus Ruas Jalan Rapak Indah). dspace.umkt.ac.id, 14-15.
Salsabila, S., Rifai, A. I., & &. T. (2022). The Geometric Design of Horizontal Curves Using The Autocad Civil 3D® Method: A Case Study of Trans Flores Roads. Indonesian Journal of Multidisciplinary Science, 1(1), 251-264.
Salsabila, V. F., Rifai, A. I., & & Isradi, M. (2022). The Geometric Design of Horizontal Curved on Jalan Drono–Nganom, Wonogiri Using Autocad® Civil 3D. Indonesian Journal of Multidisciplinary Science, 1(1), 304-317.
Stefanus, S., Rifai, A. I., & & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 739-747.
Ulchurriyyah, N., Rifai, A. I., & Taufik, M. (2022). The Geometric Redesign of Horizontal Curved Using AutoCAD Civil 3D®: A Case Jalan Garuda–Jalan Moh. Hatta, Tasikmalaya West Java. Indonesian Journal of Multidisciplinary Science, 1(1), 288-303.
Wibowo, D. E., & & Putra, Y. P. (2022). Evaluation and Redesign Based on Highway Geometric Design Guidelines 2021 (Case Study of Sampakan–Singosaren Road KM 13.8, Bantul Regency). Inersia: Jurnal Teknik Sipil dan Arsitektur, 18(2), 189-198.
Wibowo, D. E., & & Putra, Y. P. (2022). Evaluation and Redesign Based on Highway Geometric Design Guidelines 2021 (Case Study of Sampakan–Singosaren Road KM 13.8, Bantul Regency). Inersia: Jurnal Teknik Sipil dan Arsitektur, 18(2), 189-198.
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD® Civil 3D: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 843-850.
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD® Civil 3D: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 843-850.
.png){kind=small}
