Road Geometric Planning at the Kertajati Toll Gate Towards Kertajati International Airport
DOI:
https://doi.org/10.37253/leader.v2i3.10142Keywords:
Road, Geometric, AutoCAD Civil 3DAbstract
Roads are a very important infrastructure facility to connect one area to another. Indonesia with a large population result in the need for adequate infrastructure such as in terms of transportation. One of them is the West Java International Airport, to get to this place you need adequate access. So, you need precise, ideal, and fast road geometric planning using AutoCAD Civil 3D. This research using AutoCAD Civil 3D software aims to improve efficiency and optimize the Jatibarang-Kadipaten road. The method used in this study uses qualitative methods. The results of this study are to have 2 bends in the horizontal alignment with the Spiral-Cyrcle-Spiral bend type and the excavation and embankment volumes are 1562203.72 m2 and 36412.31 m2.
Downloads
References
A. Palilu, "Pembangunan Infrastruktur Transportasi Terhadap Produk Domestik Regional Bruto.," CV. Azka Pustaka, p. 50, 2022.
N. Zulfa, A. I. Rifai and M. Taufik, "Road Geometric Design used AutoCAD® Civil 3D: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 843-850, 2022.
M. Rizqi, A. I. Rifai and S. K. Bhakti, "Design of Road Geometric with AutoCAD® Civil 3D: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 879-887, 2022.
A. I. Rifai, Y. Latief and L. S. Rianti, "Data mining applied for earthworks optimisation of a toll road construction project.," In MATEC Web of Conferences EDP Sciences, pp. Vol. 195, pp. 1-9, 2018.
D. S. Adiputra, A. I. Rifai and S. K. Bhakti, "Design of Road Geometric with AutoCAD® 2D: A Case Wirosari-Ungaran Semarang, Indonesian.," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 729-738, 2022.
R. Y. Gunawan, A. I. Rifai and M. A. Irianto, "AutoCAD® 2D for Geometric Design of Terbanggi Besar–Pematang Panggang Highway (Sta. 28+ 650–Sta. 53+ 650)," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 757-765, 2022.
E. Cigu, D. T. Agheorghiesei, A. F. Gavriluță and E. Toader, "Transport infrastructure development, public performance and long-run economic growth: a case study for the Eu-28 countries.," Sustainability, 11(1), p. 67, 2018.
H. Prasetyo, H. Widyastuti and A. A. G. Kartika, "Perencanaan Geometrik dan Perkerasan Jalan Tol kertosono-Kediri (Kertosono STA 0+ 000 sampai Kediri STA 21+ 300.," Jurnal Teknik ITS, 9(1), pp. E51-E57, 2020.
S. Stefanus, A. I. Rifai and N. Nasrun, "Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways.," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 739-747, 2022.
P. Gaikawad and S. D. Ghodmare, "A Review-Geometric Design of Highway with the Help of Autocad Civil 3D.," International Journal for Research in Applied Science and Engineering Technology, 8(5), p. 916, 2020.
F. Firmansyah, A. I. Rifai and M. Taufik, "The Performance of Roundabouts with Traffic Signals: A Case Kadipaten Intersection, Indonesia A Case Kadipaten Intersection, Indonesia.," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 823-832, 2022.
S. H. Maulana, A. I. Rifai and M. Isradi, "The Horizontal Curved Geometric Redesign on Jalan Kayu Api Kuala Penaso, Riau Using the Autocad Civil 3d® Method.," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 318-330, 2022.
N. Ulchurriyyah, A. I. Rifai and M. Taufik, "The Geometric Redesign of Horizontal Curved Using AutoCAD Civil 3D®: A Case Jalan Garuda–Jalan Moh. Hatta, Tasikmalaya West Java.," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 288-303, 2022.
K. Castañeda, O. Sánchez, R. F. Herrera and G. Mejía, "Highway Planning Trends: A Bibliometric Analysis," Sustainability, 14(9), p. 5544, 2022.
R. Rizki, A. I. Rifai and E. Z. Djamal, "Geometric Redesign of Jalan Cisauk–Jaha, Banten with Manual Method (Sta. 0+ 000-Sta. 0+ 350)," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 859-864, 2022.
R. B. Nugroho, A. I. Rifai and A. F. Akhir, "The Geometric Design of Horizontal Alignment: A Case of Bojonggede-Kemang Area Route, West Java Indonesia," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 331-343, 2022.
C. P. Ng, T. H. Law, F. M. Jakarni and S. Kulanthayan, "Road infrastructure development and economic growth.," In IOP Conference Series: Materials Science and Engineering. IOP Publishing, p. 012045, 2019.
Y. Rachmadina, A. I. Rifai and S. Handayani, "Traffic Management Effectivity of Bulak Kapal Underpass Development, Bekasi Indonesia," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 369-382, 2022.
W. Sun, P. Bocchini and B. D. Davison, "Resilience metrics and measurement methods for transportation infrastructure: The state of the art.," Sustainable and Resilient Infrastructure, 5(3), pp. 168-199, 2022.
E. O. Joice, A. I. Rifai and M. Taufik, "The Link Road Design of Jalan Plupuh Tanon And Jalan Gabugan Section 1, Sragen Indonesia.," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 211-223, 2022.
A. I. Rifai, M. Hafidh, M. Isradi and J. Prasetijo, "Analisis kinerja Cold Paving Hot Mix Asbuton dengan Filler Portland Cement terhadap intensitas rendaman," Teknisia, p. 28, 2023.
S. Salsabila, A. I. Rifai and M. Taufik, "The Geometric Design of Horizontal Curves Using The Autocad Civil 3D® Method: A Case Study of Trans Flores Roads.," Indonesian Journal of Multidisciplinary Science, 1(1), pp. 251-264, 2022.
A. H. Agniya, A. I. Rifai and M. Taufik, "The Geometric Design of New Jakarta-Cikampek Highway Access Using Autocad® Civil 3D: A Case of West Karawang Industrial Area.," Indonesian Journal of Multidisciplinary Science, 1(1),, pp. 189-198, 2022.
H. Chakole and P. J. Wadhai, "A Review on The comparison of geometric design using Civil 3D software and manual method.," International Journal for Modern Trends in Science and Technology, p. 117, 2022.
O. Bagdasar, S. Berry, S. O’Neill, N. Popovici and R. Raja, "Traffic assignment: Methods and simulations for an alternative formulation of the fixed demand problem.," Mathematics and Computers in Simulation, 155, pp. 360-373, 2019.
G. Sil, A. Maji, S. Nama and A. K. Maurya, "Operating speed prediction model as a tool for consistency based geometric design of four-lane divided highways.," Transport, 34(4), pp. 425-436, 2019.
S. Pandey, E. Atul and Y. Bajpai, "Planning, Designing And Proposing A Flyover Road Using Autocad Civil 3D Software.," Planning, 5(08), pp. 164-168, 2019.
A. Arifin and A. I. Rifai, "Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD® Civil 3D (STA 3+ 000-STA. 4+ 800)," Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), pp. 851-858, 2022.
M. Mandal, P. Pawade, P. Sandel and R. S. Infrastructure, "Geometric design of highway using Civil 3D.," International Journal of Advance Research, Ideas and Innovations in Technology, 5(3), pp. 214-217, 2019.
A. I. Rifai, S. P. Hadiwardoyo, A. G. Correia, P. Pereira and P. Cortez, "The data mining applied for the prediction of highway roughness due to overloaded trucks," International Journal of Technology, 6(5), pp. 751-761, 2015.
A. I. Rifai, S. P. Hadiwardoyo, A. G. Correia and P. A. Pereira, "Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway.," Applied Mechanics and Materials (Vol. 845), pp. 369-378, 2016.
M. F. Subkhan, "Evaluasi dan perencanaan ulang desain geometrik jalan berdasarkan standart bina marga pada ruas jalan dadaprejo kota batu," Prokons: Jurnal Teknik Sipil, pp. 79-84, 2019.
.png){kind=small}
