DESIGN OF ROAD GEOMETRIC WITH AUTOCAD® CIVIL 3D: A CASE JALAN KERTAWANGUNAN–KADUGEDE, KUNINGAN-INDONESIA
DOI:
https://doi.org/10.37253/leader.v2i2.9547Keywords:
Alignment horizontal, alignment vertical, AutoCAD® Civil 3D, corridor, cut and fillAbstract
In today's globalized world, much software is developed to make work easier to implement. This software is demonstrated using AutoCAD Civil 3D® to demonstrate how geometric road design can be completed briefly. In this case, the purpose of geometric planning is to evaluate the effectiveness of manual geometric planning using AutoCAD Civil 3D®. This journal's geometric road planning implements qualitative methods. The geometric planning of the road that became the subject of this journal's research is located on Jalan Kertawangunan - Kadugede, with a road plan length of 9.3 km as an additional alternative to Kuningan Regency's new outer ring road. The calculation of horizontal alignment required the minimum bend (Rmin) and transition arch (Ls) values. Therefore, it is necessary to plan the assembly ahead of time before planning the corridor. The corridor's function is to determine the location of cut and fill based on road planning. As a result, planning a path with AutoCAD Civil 3D® is more effective and efficient, and it can retrieve the necessary data quickly. There are four points of interest with different types of curves in road traffic planning. The plan speed (Vr) was set to 60 km/h, the maximum superelevation slope (e-maks) was set to 0.08, and the transverse friction coefficient (f) was set to 0.153. The average excavation volume obtained from this planning is approximately 1,900,000 m3
Downloads
References
Chakole, H., & Wadhai, P. J. (2022). The comparison of geometric design using Civil 3D software and manual method.
Dong, Z., Zhaoming, W., Zhiqiang, L., & Minmin, Y. (2019). Research on Application of Highway Green Construction Technology. In IOP Conference Series: Earth and Environmental Science, (Vol. 310, No. 2, p. 022002). IOP Publishing.
Gaikawad, P., & Ghodmare, S. D. (2020). A Review-Geometric Design of Highway with the Help of Autocad Civil 3D. International Journal for Research in Applied Science and Engineering Technology, 8(5).
Gibbons, S., Lyytikäinen, T., Overman, H. G., & Sanchis-Guarner, R. (2019). New road infrastructure: the effects on firms. Journal of Urban Economics, 110, 35-50.
Khaska, K., & Miletics, D. (2021). Sight distance analyses for autonomous vehicles in Civil 3D. Pollack
Periodica, 16(3), 33-38.
Liu, Y., Guo, J., Taplin, J., & Wang, Y. (2017). Characteristic analysis of mixed traffic flow of regular and autonomous vehicles using cellular automata. Journal of Advanced Transportation.
Maji, A. V. (2017). Optimization of horizontal highway alignment using a path planner method. WIT Trans
Built Environ, 81-92.
Mandal, M., Pawade, P., Sandel, P., & Infrastructure, R. S. (2019). Geometric design of highway using
Civil 3D. International Journal of Advance Research, Ideas and Innovations in Technology, 5(3). Milton, J., & Mannering, F. (1998). The relationship among highway geometrics, traffic-related elements
and motor-vehicle accident frequencies. Transportation, 25(4), 395-413.
Pandey, S., Atul, E., & Bajpai, Y. (2019). Planning, Designing and Proposing A Flyover Road Using
Autocad Civil 3D Software. Planning, 5(08).
Raji, S. A., Zava, A., Jirgba, K., & Osunkunle, A. B. (2017). Geometric Design of a Highway Using
Autocad Civil 3d. Journal of Multidisciplinary Engineering Science and Technology (JMEST),
(6).
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., & Pereira, P. A. (2016). Genetic Algorithm Applied for Optimization of Pavement Maintenance under Overload Traffic: Case Study Indonesia National Highway. Applied Mechanics and Materials (Vol. 845) (pp. 369-378). Trans Tech Publications Ltd.
Rifai, A. I., Hadiwardoyo, S. P., Correia, A. G., Pereira, P., & Cortez, P. (2015). The data mining applied for the prediction of highway roughness due to overloaded trucks. International Journal of Technology, 6 (5), 751-761.
Rifai, A. I., Latief, Y., & Rianti, L. S. (2018). Data mining applied for earthworks optimisation of a toll road construction project. In MATEC Web of Conferences (Vol. 195, p. 04019). EDP Sciences.
Rifai, A. I., Surgiarti, Y. A., Isradi, M., & Mufhidin, A. (2021). Analysis of Road Performance and the impact of Development in Pasar Minggu, Jakarta: Case Study of Jalan Lenteng Agung-Tanjung
Barat. ADRI International Journal of Civil Engineering, 6(1).
Rizaldi, A., Dixit, V., Pande, A., & Junirman, R. A. (2017). Predicting casualty-accident count by highway design standards compliance. International journal of transportation science and technology,
-183.
Sahu, S., Mishra, S. P., Barik, K. K., & Sahu, D. K. (2022). Implementation of Road Safety Audit to Highlight the Deformities in the Design and Environmental Safety Features: A Case Study on National Highway-326. International Journal of Environment and Climate Change, 1123-1140.
Setyawan, A. Y., Setiawan, A. G., & Prabowo, G. R. (2021). The Evaluation of Deflection and Tensile Stress in Jointed Plain Concrete Pavement for a Damaged Road. In Journal of Physics: Conference Series, 1912.
Sukalkar, V. G., & Pawar, K. (2022). A Study and Design of Two Lane with Paved Shoulder in Green Filed
Corridor, By Using Civil 3D.
Sushma, M. B., Roy, S., Prasad, M. B., & Maji, A. (2020). Optimum point of intersection selection in horizontal highway alignment design: a comparative study using path planner method and ant
algorithm. In Transportation Research, 185-199.
Tang, Z., Chen, S., Cheng, J., Ghahari, S. A., & Labi, S. (2018). Highway design and safety consequences: A case study of interstate highway vertical grades. Journal of Advanced Transportation.
Veer, S. P., Gupte, S., & Juremalani, J. (2018). A Review of Literature on Geometric Design of Highway.
International Research Journal of Engineering and Technology (IRJET) Volume, 5.
Xu, J., Lin, W., & Shao, Y. (2017). New design method for horizontal alignment of complex mountain highways based on “trajectory–speed” collaborative decision. Advances in Mechanical Engineering, 9(4).
Yuono, E. R., & Sugiyanto, M. A. (2016). Perencanaan Geometrik Jalan Ruas Jalan Kertawangunan - Kadugede Kabupaten Kuningan. Jurnal Konstruksi, 260.
Yuono, E. R., & Sugiyanto, M. A. (2020). Perencanaan Geometrik Jalan Ruas Jalan
Kertawangunan-Kadugede Kabupaten Kuningan. Jurnal Konstruksi dan Infrastruktur., 5(3).
Zhou, Y., Huang, R., Jiang, T., Dong, Z., & Yang, B. (2021). Highway alignments extraction and 3D modeling from airborne laser scanning point clouds. International Journal of Applied Earth Observation and Geoinformation, 102.
.png){kind=small}
