Comparison of Beam Structure Calculations Using SNI 03-2847-2013 with British Standard 8110-01-1997

Authors

  • Rafa Okta Fiana Universitas Internasional Batam
  • Usmanul Hayadi Umar Universitas Internasional Batam
  • Amanatullah Savitri Universitas Internasional Batam

DOI:

https://doi.org/10.37253/jcep.v5i1.9072

Keywords:

SNI, British Standard, Structure

Abstract

There are many regulations that can be used as work standards in planning building structures. Structural Concrete Requirements for Buildings SNI 03-2847-2013 is the standard used in Indonesia, but other standards, such as British Standard 8110-01-1997, are also used. The aim of this research is to determine the difference in beam structure calculations using the SNI 03-2847-2013 method and British Standard 8110-1997. In this research, the analysis method includes preparation, calculation and drawing conclusions, as well as recommendations. The calculation stage includes a comparison of SNI 03-2847-2013 with British Standard 8110-01-1997. The calculation results show different reinforcement dimensions for SNI and British Standard.

Downloads

Download data is not yet available.

References

Priscillia Engelin Ester Ticoalu, Jorry D. Pangouw, and Servie O. Dapas, “STUDI KOMPARASI PERHITUNGAN STRUKTUR BANGUNAN DENGAN MENGGUNAKAN SNI 03-2847-2013 DAN BRITISH STANDARD 8110-1-1997,” Jurnal Sipil Statik, vol. 3, no. 10, pp. 1–10, 2015.

Malindo Andhi Saputra and Rini Rachmawati, “PERKEMBANGAN KAWASAN INDUSTRI DAN PERMUKIMAN DI KOTA BATAM TAHUN 1997-2007,” Ekonomi Sosial, vol. 5, no. 3, pp. 1–9, 2014.

Merry Lita, “Analisis Perbandingan Metode SNI dan British Standard Dalam Perhitungan Struktur Gedung Bertingkat,” 2018.

Angghi Riyanto, “Analisa Perhitungan Volume Besi Dan Beton Pada Struktur Kolom Gedung Tower 1 Proyek Meisterstadt Batam,” Jurnal Teknik Sipil , vol. 10, no. 3, pp. 1–12, 2018.

Noerman Adi Prasetya, Ahmad Hernadi, and Agung Nugroho, “Studi Komparasi Perancangan Balok Struktural Berdasarkan SNI 2847-2002, SNI 2847-2013 Dan SNI 2847-2019,” Borneo Engineering: Jurnal Teknik Sipil, vol. 5, no. 3, pp. 1–13, 2021.

Anizar Rafi Arrosyid, “DESAIN STRUKTUR ATAS GEDUNG BAJA BERTINGKAT BANYAK MENGGUNAKAN SNI 1729:2020,” 2023.

Tika Olivia, “Tinjauan Ulang Kekuatan (Up) Struktur Gedung Fakultas Teknik Universitas Siliwangi Dengan Metode SNI 2847-2013,” 2015.

Jessen G. Potalangi, Hieryco Manalip, and Steenie E. Wallah, “ANALISIS KERUNTUHAN GEDUNG BERTINGKAT AKIBAT BEBAN GEMPA DAN BEBAN ANGIN DENGAN METODE PUSHOVER,” Jurnal Ilmiah Media Engineering, vol. 10, no. 1, pp. 1–12, 2020.

L. Penelitian, P. Hasil, P. Ensiklopedia, U. Muhammadiyah, and S. Barat, “ANALISIS POLA RETAK PADA STRUKTUR BALOK BETON BERTULANG DENGAN PERBANDINGAN BENTANG GESER,” Ensiklopedia of Journal, vol. 1, no. 2, 2019, [Online]. Available: http://jurnal.ensiklopediaku.org

A. K. Tanuwijaya, F. Tanaya, H. Santoso, and E. Tanojo, “PENGARUH FAKTOR KUAT LEBIH PADA KINERJA STRUKTUR BAJA RANGKA TERBREIS EKSENTRIS DENGAN TIPE MULTI-STORY X PADA BANGUNAN 12 DAN 18 LANTAI.”

Downloads

Published

2024-06-30

Issue

Section

Articles

Most read articles by the same author(s)