Road Geometric Evaluation The Jatiwangi-Cigasong On Baribis Segment, Majalengka Regency
DOI:
https://doi.org/10.37253/leader.v2i5.10260Keywords:
Road Geometrik Design Alignments Sight DistanceAbstract
Kota-kota di Indonesia telah diakui sebagai kota-kota yang ramai, Untuk mendukung aktivitas yang sedang berlangsung di Indonesia, peran transportasi sangat diharapkan. Pembangunan infrastruktur yang baik dapat dilihat dari seberapa memadainya transportasi di Indonesia. Majalengka adalah ketidakmampuan dan ekonomi dari jalan Jatiwangi-Cigasong di mana jalan di daerah ini terlalu kecil sementara aliran lalu lintas cukup padat. Desain geometrik jalan sangat mempengaruhi kenyamanan dan keselamatan pengguna jalan yang merupakan prioritas utama. Dalam penelitian geometrik jalan ini menggunakan metode penelitian kualitatif. Dari hasil analisis geometrik dapat ditarik kesimpulan, termasuk Untuk penyesuaian horizontal ada satu titik belokan, yaitu Spiral - Circle – Spiral dan Dengan titik sudut 117,16.
References
Abdulhafedh, A. (2019). Design of superelevation of highway curves: An overview and distribution methods. Journal of City and Development, 1(1), 35-40.
Adiputra, D. S., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® 2D: A Case Wirosari-Ungaran Semarang, Indonesian. . Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 729-738.
Agniya, A. H., Rifai, A. I., & Taufik, M. (2022). The Geometric Design of New Jakarta-Cikampek Highway Access Using Autocad® Civil 3D: A Case of West Karawang Industrial Area. Indonesian Journal of Multidisciplinary Science, 1(1), , 189-198.
Ahmed , M. M., & Monem, N. A. (2020). Sustainable and green transportation for better. HBRC Journal, 17-37.
Arifin, A., & Rifai, A. I. (2022). Geometric Design of Upper Cisokan Hydroelectric Power Plant Access Road with AutoCAD® Civil 3D (STA 3+ 000-STA. 4+ 800). Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 851-858.
Farid, M. R., Rifai, A. I., & Taufik, M. (2022). The Alignment Horizontal Design of Alternative Road: A Case of Jalan Subang–Cikamurang, West Java. Indonesian Journal of Multidisciplinary Science, 1(1), 344-356.
Gaikawad, P., & Ghodmare, S. D. (2020). A Review-Geometric Design of Highway with the Help of Autocad Civil 3D. International Journal for Research in Applied Science and Engineering Technology, 8(5), 916.
L. Haven, T., & Van Grootel, D. L. (2019). Preregistering qualitative research. Accountability in research, 26(3), 229-244.
Llopis-Castelló, D. F. (2021). Comparison of the highway safety manual predictive method with safety performance functions based on geometric design consistency. Journal of Transportation Safety & Security, 13(12),, 1365-1386.
Mahanpoor, M., Monajjem, S., & Balali, V. (2021). An optimization model for synchronous road geometric and pavement enhancements. Journal of Traffic and Transportation Engineering (English Edition), 8(3), 421-438.
Nugroho, R. B., Rifai, A. I., & Akhir, A. F. (2022). The Geometric Design of Horizontal Alignment: A Case of Bojonggede-Kemang Area Route, West Java Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 331-343.
Nugroho, R. B., Rifai, A. I., & Akhir, A. F. (2022). The Geometric Design of Horizontal Alignment: A Case of Bojonggede-Kemang Area Route, West Java Indonesia. Indonesian Journal of Multidisciplinary Science, 1(1), 331-343.
Nurjannah, S. N., Rifai, A. I., & Akhir, A. F. (2022). Geometric Design for Relocation of National Road Sei Duri-Mempawah Section, West Kalimantan using AutoCAD® 2D. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 692-702.
Putra, A. S., & Warnars, H. L. (2018). Intelligent traffic monitoring system (ITMS) for smart city based on IoT monitoring. In 2018 Indonesian Association for Pattern Recognition International Conference (INAPR). IEEE, 161-165.
Ragnoli, A., De Blasiis, M. R., & Di Benedetto, A. (2018). Pavement distress detection methods: A review. Infrastructures, 3(4), 58.
Rahayu, Y. S., Rifai, A. I., & Taufik, M. (2022). Analysis of Road Geometrics with ASSHTO Method (Solo–Yogyakarta–NYIA Kulon Progo Toll Road Section 1 Package 1.1 Solo–Klaten (STA 0+ 000–22+ 300). Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 944-954.
Rizqi, M., Rifai, A. I., & Bhakti, S. K. (2022). Design of Road Geometric with AutoCAD® Civil 3D: A Case Jalan Kertawangunan–Kadugede, Kuningan-Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 879-887.
Salsabila, V. F., Rifai, A. I., & Isradi, M. (2022). The Geometric Design of Horizontal Curved on Jalan Drono–Nganom, Wonogiri Using Autocad® Civil 3D. Indonesian Journal of Multidisciplinary Science, 1(1), 304-317.
Stefanus, S., Rifai, A. I., & Nasrun, N. (2022). Implementation Autocad® Civil 3D for Horizontal Alignment Design of Indramayu-Jatibarang Highways. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5), 739-747.
Ulchurriyyah, N., Rifai, A. I., & Taufik, M. (2022). The Geometric Redesign of Horizontal Curved Using AutoCAD Civil 3D®: A Case Jalan Garuda–Jalan Moh. Hatta, Tasikmalaya West Java. Indonesian Journal of Multidisciplinary Science, 1(1),, 288-303.
Yujun, C., Juhua, P., Jiahong, D., Yue, W., & Zhang, X. (2019). Spatial–temporal traffic outlier detection by coupling road level of service. IET Intelligent Transport Systems, 13(6), 1016-1022.
Zulfa, N., Rifai, A. I., & Taufik, M. (2022). Road Geometric Design used AutoCAD® Civil 3D: A Case Study Jalan Campaka-Wanaraja Garut, Indonesia. Citizen: Jurnal Ilmiah Multidisiplin Indonesia, 2(5),, 843-850.
.png){kind=small}
