Analysis of the Effect of Adding Calcium Carbonate (CaCo3) Against the Compressive Strength of Light Bricks (Compressive Strength Analysis of Light Bricks Based on SNI Rules 03-3449-2002)

-

Authors

  • Sutria Desman Prodi Teknik Sipil, Sekolah Tinggi Teknologi Payakumbuh
  • Hanifah Asnur Prodi Teknik Sipil, Sekolah Tinggi Teknologi Payakumbuh

DOI:

https://doi.org/10.37253/leader.v2i6.10254

Abstract

The use of lightweight bricks in construction is an effort to reduce the load on building structures and material consumption compared to traditional bricks. Lightweight brick, often also called lever brick, is a building material for walls that is much in demand in building construction. Lightweight bricks are made from a mixture of Portland cement, water, sand and foam. This research aims to determine the compressive strength of lightweight bricks without Calcium Carbonate and to determine the effect of adding Calcium Carbonate on the compressive strength of lightweight bricks. This research uses an experimental method using a quantitative approach. The results of testing the compressive strength of lightweight bricks aged 14 days produced an average compressive strength value for normal bricks of 0.7168 MPa, %5 calcium carbonate mixture of 0.6199 MPa, 10% calcium carbonate mixture of 0.5618 MPa, 15% calcium carbonate mixture % of 0.4843 MPa.

References

D. Arita, A. Kurniawandy, and H. Taufik, “TINJAUAN KUAT TEKAN BATA RINGAN MENGGUNAKAN BAHAN TAMBAH FOAMING AGENT,” J. Saintis, vol. 4, no. 1, p. 10, 2017, [Online]. Available: https://media.neliti.com/media/publications/200645-tinjauan-kuat-tekan-bata-ringan-mengguna.pdf

B. P. Nugroho, “Tinjauan Kuat Tekan Dan Kuat Lentur Balok Tanpa Tulangan Beton Ringan Menggunakan Batu Apung Sebagai Agregat Kasar Dengan Bahan Tambah Kapur Dan Aluminium Pasta,” Universitas Muhammadiyah Surakarta, 2013. [Online]. Available: https://eprints.ums.ac.id/27107/

D. K. Ningrum and M. F. Sofianto, “Pengaruh Penggunaan Kapur Sebagai Bahan Pengganti Sebagian Semen Terhadap Berat Volume, Kuat Tekan Dan Penyerapan Air Pada Bata Beton Ringan Seluler Berbahan Dasar Bottom Ash,” J. Rekats, vol. 3, no. 1, 2018, [Online]. Available: https://ejournal.unesa.ac.id/index.php/rekayasa-teknik-sipil/article/view/26022

Badan Standar Nasional, “SNI 03-0349-1989 Bata Beton Untuk Pasangan Dinding.” p. 1, 1989.

Departemen Pekerjaan Umum, “SK SNI T-03-3449-2002 TATA CARA RENCANA PEMBUATAN CAMPURAN BETON RINGAN DENGAN AGREGAT RINGAN.” 2002.

P. Nugraha and Antoni, Teknologi Beton Dari Material,Pembuatan, Ke Beton Kinerja Tinggi, Edisi I. Yogyakarta: Penerbit ANDI, 2007.

T. Mulyono, Teknologi Beton, Edisi II. Yogyakarta: Penerbit ANDI, 2005.

M. Toha, “Analisis Sifat-sifat Beton Busa Karet Ban Vulkanisir Dengan Menggunakan Bahan Tambah Abu Sekam Padi,” Universitas Muhammadiyah Sumatera Utara, 2021.

N. H. Haryanti, “Kuat Tekan Bata Ringan Dengan Bahan Campuran Abu Terbang PLTU Asam-asam Kalimantan Selatan,” J. Fis. FLUX, vol. 12, no. 1, pp. 20–30, 2015, [Online]. Available: https://ppjp.ulm.ac.id/journal/index.php/f/article/view/1302/1123

Badan Standar Nasional, “SNI 3423 : 2008 Cara Uji Analisis Ukuran Butir Tanah.” 2008.

Downloads

Published

2024-12-30

Issue

Section

Articles